D-Link DWR-956 User Manual page 228

DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
In the opened window, you can specify the following parameters:
Parameter
Event
Phone
Template
Ring
After specifying the needed parameters, click the SAVE button.
To edit the parameters of an existing event, in the Event List section, select the corresponding line
in the table. In the opened window, change the needed parameters and click the SAVE button.
To remove an existing event, select the checkbox located to the left of the relevant line in the table
and click the DELETE button (
After specifying the needed parameters, click the APPLY button.
Figure 176. The window for adding an event.
Select the needed value from the drop-down list.
AlertInfo: Allows to change the phone ring type according
•
to special ISP's data specified in the Template field.
CallerID: Allows to change the phone ring type according to
•
special ISP's data specified in the Phone field.
The phone number of the calling party. Contact your ISP to clarify
the number format. The field is displayed if the CallerID value is
selected in the Event drop-down list.
The value of CallerID information field transmitted by your ISP in
SIP packets. Contact your ISP to clarify the template format. The
field is displayed if the AlertInfo value is selected in the Event
drop-down list.
Select a ring for the event from the drop-down list.
). Only events created by the user can be deleted.
Page 228 of 302
Configuring via Web-based Interface
Description