D-Link DWR-933 User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Network Router
  5. DWR-933
  6. User manual
D-Link DWR-933 User Manual

D-Link DWR-933 User Manual

4g/lte mobile router
Hide thumbs Also See for DWR-933:
Table of Contents

Advertisement

Quick Links

Download this manual
Version 1.00 | 07/26/2018
User Manual
4G/LTE Mobile Router
DWR-933

Advertisement

Table of Contents
loading

Related Manuals for D-Link DWR-933

Summary of Contents for D-Link DWR-933

  • Page 1 Version 1.00 | 07/26/2018 User Manual 4G/LTE Mobile Router DWR-933...
  • Page 2 Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description July 26, 2018 • Initial release...

  • Page 3: Table Of Contents

    SIM Card PIN Lock Settings ..........26 Configuration ..............9 My Operator (PLMN) ............27 Initial Connection to the Router ..........9 Operator Mode (PLMN) ..........27 Connect via USB ..............9 Available Operators ............28 USB Tethering Driver Installation ........9 D-Link DWR-933 User Manual...
  • Page 4 Add Port Forwarding ............44 Networking Basics ............75 Advanced Options ..............45 Check your IP address ...............75 UPnP ...................45 Statically Assign an IP address ..........76 Power Saving ..............46 System ....................47 Technical Specifications ..........77 System Information ............47 About DWR-933 ..............47 D-Link DWR-933 User Manual...

  • Page 5: Product Overview

    Section 1 - Product Overview Product Overview Package Contents D-Link DWR-933 4G/LTE Mobile Router USB Cable If any of the above items are missing or damaged, please contact your reseller. EU Battery & WEEE Directives Disposal and Recycling This product may contain a battery. Recycle or dispose of batteries in accordance with the battery manufacturer's instructions and local/national disposal and recycling regulations.

  • Page 6: System Requirements

    Web-based Configuration Browser Requirements: Utility Requirements • Internet Explorer 9 or higher • Firefox 12 or higher • Safari 4 or higher • Chrome 20 or higher Subject to services and service terms available from your carrier. D-Link DWR-933 User Manual...

  • Page 7: Introduction

    High-Speed Mobile Internet with LTE Connectivity The DWR-933 4G/LTE Mobile Router gives you high-speed Internet wherever you are and lets you share it on the go. Using LTE technology, you can achieve download speeds of up to 300 Mbps and upload speeds of up to 50 Mbps .

  • Page 8: Hardware Overview

    Press and hold this button for 3 seconds to power on/off the device. WPS Button Press this button to add new wireless devices quickly and easily using Wi-Fi Protected Setup (WPS). Display This display shows various information about the router. D-Link DWR-933 User Manual...

  • Page 9: Battery Cover Removed

    Using a paper clip, press and hold this button for 5 seconds to reboot the unit. Reset Button Note: Ensure that the battery is inserted and the unit is powered on when pressing the reset button. D-Link DWR-933 User Manual...

  • Page 10: Lcd Display

    LCD Display When you turn on the DWR-933, the D-Link logo will appear while the device is booting, then the home screen will appear. After a few seconds of inactivity the screen will power off. To wake up the display, press the Power Button ( ) or WPS Button...

  • Page 11: Installation

    5. Reinsert the battery and reattach the battery cover. 6. Connect the USB cable and plug it into the USB port of a power adapter or a PC to charge the battery D-Link DWR-933 User Manual...

  • Page 12: Wireless Installation Considerations

    Wireless Installation Considerations The DWR-933 can be accessed using a wireless connection from anywhere within the operating range of its wireless network. Keep in mind that the quantity, thickness, and location of walls, ceilings, or other objects that the wireless signals must pass through may adversely affect wireless signals.

  • Page 13: Configuration

    Initial Connection to the Router By default, the DWR-933 comes configured to work with most 4G SIM cards. Simply connect to it via Wi-Fi or use the included USB to access the SIM’s Internet connection. If you wish to configure the router, you will need to establish a direct connection with the router in order to access the web-based configuration utility.

  • Page 14: Connect Via Wi-Fi

    DWR-933 will be in the format dlink_DWR-933_xxxx, where “xxxx” represents the last four characters of the DWR-933’s MAC address. The default SSID and password can also be found on the product label attached to the battery cover. For more information on where to find this label refer to Hardware Overview on page 4.
  • Page 15 You can also set up a connection using the Windows built-in WPS feature. Please see Connecting to a Wireless Network on page 60. D-Link DWR-933 User Manual...

  • Page 16: Web-Based Configuration

    Once you have reached the configuration utility through your web browser, you will need to log in. Enter admin as the username, and then enter the password. By default, the password should be left blank. Click Sign in to continue. D-Link DWR-933 User Manual...

  • Page 17: Navigation

    The System tab allows you to view system information, change your login information, and upgrade the firmware. From the SMS tab, you can sent and receive SMS text messages, as well as USSD (Unstructured Supplementary Service Data) codes, sometimes called “Quick Codes” or “Feature Codes. ” D-Link DWR-933 User Manual...

  • Page 18: Quick Access

    Section 3 - Configuration Quick Access A quick access page will be displayed on the initial home page for the DWR-933. The headings below link through to windows where you can alter settings in more detail. Internet This area displays your Internet provider, the type of Internet service you are using, signal strength, and your current data usage.

  • Page 19: Network Setup

    The Wizard page will guide you through the steps required to configure the basic settings of your router, such as the IP address, network name (SSID), and password. Click on the Setup Wizard button to begin the quick setup wizard. D-Link DWR-933 User Manual...

  • Page 20: Apn For Lte/3G

    Select this if your service provider uses this protocol. Password Authentication Protocol. Select this if your service provider uses this protocol. CHAP Challenge Handshake Authentication Protocol. Select this if your service provider uses this protocol. Click Next to move to the next section. D-Link DWR-933 User Manual...

  • Page 21: Wi-Fi 2.4/5 Ghz Ssid

    Pre -Shared Key The pre-shared key is the password which clients will require in order to connect to your network. Enter a password of between 8 and 63 characters in length. D-Link DWR-933 User Manual...

  • Page 22: If You Selected Basic Protection

    Select whether you wish to use 64 bit or 128 bit characters in your key using the slider menu. Enter the desired key in the field provided. Click Next to move to the next section. D-Link DWR-933 User Manual...

  • Page 23: Admin Settings

    Select your current time zone relative to UTC (Coordinated Universal Time). Date & Time Adjust the dials on the screen with your mouse cursor or pointer to set the time and date. Selected Date and Time Displays your new, dial-adjusted time. D-Link DWR-933 User Manual...
  • Page 24 Select your current time zone relative to UTC (Coordinated Universal Time). Synchronization You can specify in hours how frequently the Cycle DWR-933 will synchronize with the SNTP server. Click Next to move to the next section. D-Link DWR-933 User Manual...

  • Page 25: Apply Settings

    Section 3 - Configuration Apply Settings Check all settings in the wizard and click Apply. After applying your settings, your router will need to reboot. Click Apply to save changes. D-Link DWR-933 User Manual...

  • Page 26: Internet Settings

    Displays your current IP address. Total DL Displays the total amount of downloaded data. Total UL Displays the total amount of uploaded data. Note: These counters may be reset when the battery or SIM card is removed. D-Link DWR-933 User Manual...

  • Page 27: Apn Settings

    If so, you may need to contact your service provider regarding these details. Access Point Name (APN) Settings APN Selection Mode Auto - Select this option if you want the DWR-933 to automatically connect to a mobile network after it has been powered on, or has been disconnected from its current mobile network.

  • Page 28: Apn Mode

    Choose the authentication method that your ISP uses to connect to its mobile network. If you do not know this information, please contact your service provider. For more information refer to Connection Settings on page 16. Click Apply to save changes. D-Link DWR-933 User Manual...

  • Page 29: Connection Mode Settings

    Check with your provider for details. Choose between Always or Manual for connecting Connection Mode to the Internet. If you selected Manual Connection Mode: Connect/disconnect Toggle the switch to enable/disable your Internet manually connection. Click Apply to save changes. D-Link DWR-933 User Manual...

  • Page 30: Sim Card Pin Lock Settings

    Section 3 - Configuration SIM Card PIN Lock Settings This section allows you to lock the SIM card currently inserted into the DWR-933. No. of Retry The number of retries left to access your SIM. Note: If you exceed the number of retries, your SIM card will be locked and can only be unlocked by your operator.

  • Page 31: My Operator (Plmn)

    This page allows you to view available Public Land Mobile Networks (PLMN). This page can also be used to select a preferred network when you are roaming outside of your home network. Operator Mode (PLMN) PLMN Mode Displays the current mode the DWR-933 is operating in. Select Automatic to allow the DWR-933 to automatically connect to the first available network when roaming.

  • Page 32: Available Operators

    ID number assigned to each available PLMN. Use it Check the box to select your desired network. Status The network’s current status. Operator Name The name of the cellular network. Access Technology The cellular network’s access technology. Click Apply to save changes. D-Link DWR-933 User Manual...

  • Page 33: Wi-Fi Settings

    Displays the name of your Wi-Fi network. Encryption Displays your current Wi-Fi security encryption mode. DHCP Displays whether DHCP server is enabled. IP Address Your router’s IP address. Your router’s subnet mask. Subnet Your router’s MAC address. MAC Address D-Link DWR-933 User Manual...

  • Page 34: Basic Settings/Wi-Fi Security Settings

    WPA2 - Clients will only be able to associate with the router using the WPA2 standard. Clients which do not support WPA2 will not be able to associate with the router. D-Link DWR-933 User Manual...

  • Page 35: If You Selected Basic Protection

    Select whether you wish to use 64 bit or 128 bit characters in your key using the slider menu. Enter the desired key in the field provided. Click Apply to save the current settings. D-Link DWR-933 User Manual...

  • Page 36: Advanced Settings

    Note that not all channels are available in all regions. If you cannot see your SSID from your device, try manually setting a low-numbered channel. Click Apply to save changes. D-Link DWR-933 User Manual...

  • Page 37: Wi-Fi Wps

    Select the band to which the WPS settings will apply. Push Button Configuration (PBC) enables you to easily connect your devices to the DWR-933 by pushing a PBC button on both devices. Press your device’s PBC button and then click Start Via PBC, to begin the WPS process.

  • Page 38: Wi-Fi Clients

    Note: If you deny access to a Wi-Fi client, you will see their MAC address in the MAC Filter on page 38. If required, you can re-allow access to the client there. Click Apply to save changes. D-Link DWR-933 User Manual...

  • Page 39: Settings

    The DWR-933 has a built-in DHCP server which can assign IP addresses to connected clients. This section shows your current settings and allows you to configure the IP address for the DWR-933, as well as configure its DHCP settings. Configure DHCP This button takes you through to DHCP settings where you can configure your IP address and IP range.

  • Page 40: Dhcp Settings

    Section 3 - Configuration DHCP Settings Here you can disable or enable your router’s DHCP Service, configure the IP address for the DWR-933, and set the range of IP addresses assigned by the DHCP server. DHCP Service DHCP Service Enable or disable the DHCP Service.

  • Page 41: Dhcp Service

    Section 3 - Configuration If you selected Configure DHCP: DHCP Service Here you can configure the IP address for the DWR-933, as well as the range of IP addresses that the DHCP will give out. DHCP Service Enable/disable the DHCP server.

  • Page 42: Mac Filter

    MAC address of the client that you wish to deny access to your network. Note: You can view the current list of clients connected to your network and their MAC addresses in Wi-Fi Clients on page 34. Click Apply to save changes. D-Link DWR-933 User Manual...

  • Page 43: Firewall Settings

    L2TP Pass Through Allows clients to connect to their corporate network or VPN using the L2TP protocol. WAN Ping Blocking When enabled the DWR-933 will not respond to pings from WAN. Access from WAN Clicking this toggle allows access from WAN. This setting may open your router to external security threats and is not recommended for most users.
  • Page 44 DMZ IP Address Enter the IP address of the DMZ. If you selected Access from WAN: Access from WAN Allows the configuration interface to be access over WAN. This setting is not recommended. Click Apply to save changes. D-Link DWR-933 User Manual...

  • Page 45: Ip Filter

    Section 3 - Configuration IP Filter The DWR-933 can filter certain IP addresses and ports. IP filtering allows you to direct specific traffic to a specified local client based on source IP address or protocol. The DWR-933 supports a maximum of 50 filters.

  • Page 46: Add Ip Filter

    Click the toggle if you wish enter a single port or a Number range of ports to be filtered. Separate port numbers with a comma. Destination Port Range Enter a destination port range to which your filter will apply. D-Link DWR-933 User Manual...

  • Page 47: Port

    Section 3 - Configuration Port This page will allow you to open a single port or a range of ports to specific IP addresses. The DWR-933 supports a maximum of 50 filters. ID number given to the new rule. Delete Click here to select the rules you wish to delete.

  • Page 48: Add Port Forwarding

    Select the port number or numbers for your service Global Port Destination Port Range to be exposed to the Internet. Enter a single port or a range. If entering multiple ports, separate port numbers with a comma. Click Apply to save your changes. D-Link DWR-933 User Manual...

  • Page 49: Advanced Options

    Click the toggle to use the Universal Plug and Play (UPnP) feature. Note: UPnP is intended for advanced users only. Enabling this feature may expose your network and devices to attacks over the Internet. It is disabled by default for your protection. D-Link DWR-933 User Manual...

  • Page 50: Power Saving

    Section 3 - Configuration Power Saving On this page you can configure power saving settings, to help extend the battery life of your DWR-933 when you don’t have easy access to a charger. Suspend Allows you to set the length of time after which the DWR-933 will go to sleep when no Wi-Fi clients are connected.

  • Page 51: System

    Section 3 - Configuration System System Information About DWR-933 FW Version The current firmware version of the DWR-933. Hardware Version The current firmware version of the DWR-933. IMEI International Mobile Equipment Identity is a unique number assigned to every mobile device.

  • Page 52: Admin Settings

    Enter a new password here. Confirm Password Confirm the new password here. Auto logout after Click on the drop-down arrow to select the length of time before being automatically logged out of the interface. Click Apply to save your changes. D-Link DWR-933 User Manual...

  • Page 53: Language

    Section 3 - Configuration Language This tab allows you to change the default language of the router’s web interface. Language Select your desired language here. Click Apply to save your changes. D-Link DWR-933 User Manual...

  • Page 54: Date & Time

    (UTC). Synchronization You can specify in hours how frequently the Cycle DWR-933 will update the time from an SNTP server. Select to Enable if your region uses Daylight Saving Daylight Saving Time. If you have selected Enable, enter the details of your region’s Daylight Saving scheme below.
  • Page 55 Select your current Coordinated Universal Time zone (UTC). Date & Time Adjust the dials with your mouse to set the date and time. Selected Date and Time Displays your new adjusted time. Click Apply to save your changes. D-Link DWR-933 User Manual...

  • Page 56: Settings Profile

    Settings Profile Export Profiles In the Export Profiles tab you can export your current configuration to a computer. Export To Get Current Click the Click Me button to download the current Profile settings of your DWR-933. D-Link DWR-933 User Manual...

  • Page 57: Import

    Section 3 - Configuration In the Import Profiles tab, you can import previously saved settings for the router. Import Select Browse your computer for previously exported settings. Click Apply Import to proceed. D-Link DWR-933 User Manual...

  • Page 58: Reset And Reboot

    5 seconds. Reset and Reboot Reset to Default Select the Reset to Default button to reset the DWR-933 to factory default settings. Reboot Select the Reboot button to reboot the DWR-933. D-Link DWR-933 User Manual...

  • Page 59: Firmware Upgrade

    Current Version The current version of your firmware. Note: The FW version number displayed on the image to the right may differ from your router due to firmware updates or regional variation. Click the Start Update button. D-Link DWR-933 User Manual...

  • Page 60: Sms

    Check this box to select and delete a message in your inbox. From The SMS sender’s number. Time The time the message was received. Content The SMS message’s content. Add New Click Add New to send a new message. Click Apply to save changes. D-Link DWR-933 User Manual...
  • Page 61 Choose between the location to store contact numbers, either on your SIM/UICC card or the DWR-933 device. Current Short The current number of messages received. Messages SMS Center Your SIM/UICC card’s contact number. Number Click Apply to save changes. D-Link DWR-933 User Manual...
  • Page 62 Enter the phone number of the intended recipient here. Content Type your message content here. Click Send to send your message. Click Save as Draft to save the message as a draft and send it later. D-Link DWR-933 User Manual...

  • Page 63: Ussd

    Unstructured Supplementary Service Data (USSD) allows ISP-specific applications to be activated with an SMS message. USSD USSD Code Enter an application activation code and click the Send button. This will allow you to activate applications by sending an SMS to your ISP. D-Link DWR-933 User Manual...

  • Page 64: Connecting To A Wireless Network

    Using Windows 10 When connecting to the DWR-933 wirelessly for the first time, you will need to know the default network name (SSID) and security key (Wi-Fi password) being used. These can be found on a label on the underside of the battery cover.
  • Page 65 To automatically connect with the router when your device next detects the SSID, click the Connect Automatically check box. You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next to connect to the network. D-Link DWR-933 User Manual...

  • Page 66: Using Windows 8

    To join an existing network, locate the wireless network icon in the taskbar, next to the time display. Wireless Icon Clicking on this icon will display a list of wireless networks which are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DWR-933 User Manual...
  • Page 67 WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected. D-Link DWR-933 User Manual...

  • Page 68: Using Windows 7

    If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. You can also click on the wireless icon in your system tray (lower-right corner). Wireless The utility will display any available wireless networks in your area. D-Link DWR-933 User Manual...
  • Page 69 Highlight the wireless network (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/ IP settings for your wireless adapter. Refer to Networking Basics on page 75 for more information. D-Link DWR-933 User Manual...

  • Page 70: Configuring Wireless Encryption

    1. Click on the wireless icon in your system tray (lower-right corner). Wireless 2. The utility will display any available wireless networks in your area. D-Link DWR-933 User Manual...
  • Page 71 Section 4 - Connecting to a Wireless Network 3. Highlight the wireless network (SSID) you would like to connect to and click the Connect button. 4. The following window appears while your computer tries to connect to the router. D-Link DWR-933 User Manual...
  • Page 72 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or pass phrase must be exactly the same as on the wireless router. D-Link DWR-933 User Manual...

  • Page 73: Using Windows Vista

    (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check the TCP/IP settings for your wireless adapter. Refer to Networking Basics on page 75 for more information. D-Link DWR-933 User Manual...

  • Page 74: Configuring Wireless Encryption

    Wireless Utility by right-clicking on the wireless ® ™ computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DWR-933 User Manual...
  • Page 75 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DWR-933 User Manual...

  • Page 76: Using Windows

    (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check the TCP/IP settings for your wireless adapter. Refer to Networking Basics on page 75 for more information. D-Link DWR-933 User Manual...

  • Page 77: Troubleshooting

    • Make sure that the computer you are using is not connected to any other devices (such as routers or switches) which might have the same IP address as the DWR-933, as this may cause an IP address conflict. If you have a conflict, temporarily unplug any other devices from your computer while you configure the DWR-933.
  • Page 78 If you forget your password, you must reset your router. Please note that this process will change all your settings back to the factory defaults. To reset the router, open the battery cover and using a paper clip, press and hold this button for 5 seconds to reboot the unit. The DWR-933 will restore the factory default settings.

  • Page 79: Networking Basics

    Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

  • Page 80: Statically Assign An Ip Address

    Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DWR-933 User Manual...

  • Page 81: Technical Specifications

    • Standard Micro-SIM/UICC card interface Indicators • LCD Display 1 Supported frequency band is dependent upon regional hardware version. 2 Data rates are theoretical. Data transfer rate depends on network capacity, signal strength, and other factors. D-Link DWR-933 User Manual...
  • Page 82 Potencia máxima de Salida Frequenza/e Potenza max. Output Frequentie(s) Max. Output Power 5.15 – 5.25 GHz 200 mW 5.25 – 5.35 GHz 200 mW 5.47 – 5.725 GHz 2.4 G 2.4 – 2.4835 GHz 100 mW D-Link DWR-933 User Manual...
  • Page 83 υλικολογισμικό του προϊόντος είναι διαθέσιμα για λήψη από τη σελίδα του προϊόντος στην τοποθεσία www.dlink. com. Par les présentes, D-Link Corporation déclare que ce produit, ces accessoires et ce logiciel sont conformes aux Français [French] directives 2014/53/UE.Le texte complet de la déclaration de conformité de l'UE et le icroprogramme du produit sont disponibles au téléchargement sur la page des produits à...
  • Page 84 2014/53/EU. Pełen tekst deklaracji zgodności UE oraz oprogramowanie sprzętowe do produktu można pobrać na stronie produktu w witrynie www.dlink.com. Desta forma, a D-Link Corporation declara que este produto, os acessórios e o software estão em conformidade Português [Portuguese] com a diretiva 2014/53/UE. O texto completo da declaração de conformidade da UE e do firmware...
  • Page 85 2014/53/EU. Hela texten med EU-försäkran om överensstämmelse och produkt-firmware kan hämtas från produktsidan på www.dlink.com. Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun Íslenska [Icelandic] 2014/53/EB. Sækja má ESB-samræmisyfirlýsinguna í heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www.
  • Page 86 Access Points unterstützen die Funktionen DFS (Dynamic Frequency Selection) und TPC (Transmit Power Control) wie erforderlich bei Betrieb auf 5 GHz innerhalb der EU. • Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt. D-Link DWR-933 User Manual...
  • Page 87 5 Ghz dentro de la UE. • Por favor compruebe el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalámbricas de 2.4 GHz y/o la de 5 GHz. D-Link DWR-933 User Manual...
  • Page 88 Toegangspunten ondersteunen DFS (Dynamic Frequency Selection) en TPC (Transmit Power Control) functionaliteit zoals vereist bij gebruik in 5 GHz binnen de EU. • Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz. D-Link DWR-933 User Manual...
  • Page 89 • Halten Sie das Produkt von Heizkörpern und anderen Quellen fern, die Wärme erzeugen. • Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschließlich ein trockenes fusselfreies Tuch. D-Link DWR-933 User Manual...
  • Page 90 • Mantenga el producto alejado de los radiadores y de otras fuentes de calor. • Desenchufe siempre el producto de la alimentación de red antes de limpiarlo y utilice solo un paño seco sin pelusa. D-Link DWR-933 User Manual...
  • Page 91 • Houd het product uit de buurt van radiators en andere warmtebronnen. • U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link DWR-933 User Manual...
  • Page 92 D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions.
  • Page 93 D-Link et l’environnement Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages.
  • Page 94 D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies.
  • Page 95 D-Link a životní prostředí Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
  • Page 96 D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i produktene og forpakningen. D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp.
  • Page 97 D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og reducere CO2-udledningerne.
  • Page 98 D-Link och miljön På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med låg gifthalt i både produkter och förpackningar.

Table of Contents