DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
WAN Remapping
On the Advanced / WAN Remapping page, you can configure the router to connect to a private
Ethernet line.
To use one of the router's LAN port as the WAN port, click the icon corresponding to this port and
click the APPLY button. The port configured as the WAN port is highlighted in teal.
If in the future you need to disconnect the LAN port from the private Ethernet line, click the icon
highlighted in teal and click the APPLY button.
To use the router's WAN port as a LAN port, click the icon corresponding to this port and click the
APPLY button. The port configured as a LAN port is not highlighted.
If in the future you need to connect the WAN port to the private Ethernet line, click the icon
corresponding to this port and click the APPLY button. The WAN port will be highlighted in teal
again.
Figure 147. The Advanced / WAN Remapping page.
Page 190 of 302
Configuring via Web-based Interface