D-Link DWR-956 User Manual page 144

DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Parameter
Attempts
After configuring all needed settings, click the APPLY button.
To edit the parameters of an existing tunnel, in the Tunnels section, select the relevant tunnel in
the table. On the opened page, change the needed parameters and click the APPLY button.
To remove an existing tunnel, select the checkbox located to the left of the relevant line in the table
and click the DELETE button (
VPN tunnels using EoIP technology will appear in the EoIP interfaces section on the
Advanced / VLAN page and will be automatically removed from this section after the tunnel is
deleted from the current page.
A number of failed attempts to check the state of the tunnel on the
other end after which the tunnel is disabled. By default, the value 5
is specified.
).
Page 144 of 302
Configuring via Web-based Interface
Description