The Electrical Equipment - Pfaff 260 Service Manual
Hide thumbs
Also See for 260:
- Service manual (90 pages) ,
- Instruction book (55 pages) ,
- Service manual (72 pages)
Table of Contents
Advertisement
Fig.
52
Engaging
lever d ial C
Fig.
53 Set screw g and mark h
(see adjustment procedure on page 66)
Dial Cat 1
The central
engaging lever is engaged and automatically
controls the
needle
motion for half the
width of
bight. The needle position con be set by hand.
Dial Cat 2
Both
the
central and rear engaging levers ore engaged simultaneously, auto-
matically controlling
the
needle motion for half
the
width of bight and the
needle position, respectively.
Dial Cat 3
The rear engaging lever is engaged and automatically
controls
the needle
position. The desired stitch width con
be
set
by
hand.
Dial Cat 4
The
front engaging lever
is engaged
and automatically controls the needle
motion for the entire width of bight. The needle position con
be
set by hand.
Dial C at5
Both the front and rear engaging
levers
ore engaged simultaneously, auto-
matically controlling the needle motion for
the
entire width of bight and
1he
needle position, respectively.
The Electrical Equipment
The
electrical equipment of all Pfaff 260 and 360
sewing
machines, with or
without automatic embroidery mechanism, conforms
to international
safety
regulations. Neutral electrical testing laboratories
in
Germany, Denmark, Nor-
way, Sweden, Canada, and the U.S.
hove
confirmed this. To comply with the
29
Advertisement
Table of Contents
