Samsung HMX-Q10BN User Manual page 4

Impo_¢ant safety instR,sctions
21. LIGHTNING:
For added protection of this CAMCORDER during a lightning
storm or when it is leR unattended and unused for long periods
of time, unplug it from the wall outbt and disconnect the antenna
or cabb system, This will prevent damage to the CAMCORDER
due to lightning and powerline surges,
22. POWER LINES:
An outside antenna system should not be located in the vicinky
of overhead power lines or other electric light or power circuits
where it carl fall into such power lines or circuits, When installing
an outside antenna system, exlreme care should be taken to
keep from touching such power lines or circuits as contact with
them might be fatal,
23. OVERLOADING:
Do no1 overload wall outlets and extension cords as this can
result in a risk of fire or electric shock,
24. OBJECTS AND LIQUIDS:
Newer push objects of any kind into this CAMCORDER through
openings as they may touch dangerous vokage points or short
out a part that could result in a fire or electric shock. Never
spill liquids of any kind onto the CAMCORDER, Should spillage
occur, unplug unit and have it checked by a technician before
use,
25. SERVICING:
Do not attempt to service this CAMCORDER yourself. Opening
or removing covers may expose you to dangerous voltage or
other hazards, Refer all servicing to qualified service personnel,
26. DAMAGE REQUIRING SERVICE:
Unplug this CAMCORDER from the wall outlet and refer servicing
to qualified service personnel under the following conditions:
27.
28.
29.
30.
a. When the power-supply cord or plug is damaged.
b. If any liquid has been spilled onto, or objects have fallen into the
CAMCORDER.
c. If the CAMCORDER has been exposed to rain or water.
d. If the CAMCORDER does not operate normally by following the
operating instructions, adjust only those controls that are covered
by the operating instructions. Improper adjustment of other
controls may result in damage and will often require extensive
work by a qualified technician to restore the CAMCORDER to ks
normal operation.
e. If the CAMCORDER has been dropped or the cabinet has been
damaged.
f. When the CAMCORDER exhibits a distinct change in
pedormance, this indicates a need for service.
REPLACEMENT PARTS:
When replacement parts are required, be sure the service
technksian has used replacement parts specified by the
manufacturer and having the same characteristics as the original
part, Unauthorized substitutions may result in fire, electric shock
or other hazards.
SAFELY/CHECK:
Upon compbtion of any service or repairs to this CAMCORDER,
ask the service technician to perform safety checks to determine
that the CAMCORDER is in safe) operating order.
To prevent damage which may result in fire or shock h_ard, do
not expose this appliance to rain or moisture.
If this power supply is used at 240V ac, a suitable plug adaptor
should be used,