Samsung HMX-Q10BN User Manual page 105

Adjusting the image during recording
• Set "Focus" to "Auto". (Video recording mode only) -'page 53
The recording conditions are not suitable for auto focus. Adjust the focus manually. (Video
Focus does not adjust automatically, recording mode only) _page 53
, The lens is dusty on the surface. Clean the lens and check the focus•
• Recording is being made in a dark location. Use a light to brighten the area.
Image's color balance is not natural. • The white balance is incorrect. Set the proper "White Balance"• ".page 50
A subject passing quickly through the frame " This is called the focal plane phenomenon. This is not a malfunction. Because of the way
the image device (CMOS sensor) reads out video signals, a subject passing through a
appears distorted frame rapidly may appear to bend. depending on the recording conditions.
Playback on your camcorder
.... _ .......... !_ .... _ _ ....... • _ ......
Playback (playback/pause) function does not • Image files recorded using another device may not play back on your camcorder.
work. • Check memory card corrlpatibility. '-'.page 31
Photo images stored on a storage media are • Photo images recorded on other devices may not appear in their actual size. This is not
not displayed in the actual size. an error•
Playback is interrupted unexpectedly. • Check if the AC power adaptor or battery back is properly connected and secure.
Playback on other devices (TV, etc.)
_ ............ _ _ _ ......................
You cannot view the image on or hear the
• Make sure that the connection cable is connected to the proper jack.
sound from the connected devk_e.
Tile image appears distorted on a TV. • This phenomenon is caused by connecting to a lV with 4:3 aspect ratio•
You cannot view the image on or hear the
sound from a TV connected using the HDMI " The camcorder cannot output Images from the HDMI jack if the material is copyright
cable, protected. 101