GE ZET1 Installation Instructions Manual page 12

Installation Instructions
Installing the Oven
Rack Supports and Oven
Racks
Oven Rack Supports
Place the rack support with the slotted
holes over the rear bolts and the round holes
C3
over the front bolts. Using an adjustable wrench,
lightly secure with four nuts but
do not overtighten or the enamel could be
chipped. Repeat for the second rack support.
(Top bracket shown]
|
Ho beeen
Slotted Round holes
holes over over front
rear bolts bolts
Oven Racks
a. Place the rear rack locks over and onto
the rack supports (five rack positions are
available, including the top position).
b. Slide the rack all the way in until the rear rack
locks are secure on the rear rack supports,
and press the front rack locks onto the front
rack supports.
C3
Installing the Oven
Rack Supports and Oven
Slide the rack
all the way in
and push down
to lock the
front rack locks
onto the front
rack supports
c. Slide the rack all the way out to ensure that
the rack is locked.
Installing the Metal
Bottom Trim
a. Place the bottom trim between the side trim
and against the bottom of the cutout.
C4
b. Using two trim screws provided, secure the
bottom trim through the holes in the trim.
IMPORTANT: If this unit is ever removed
from the cabinet or the oven is ever
pulled out for service, the trim must be
removed first or damage to the trim will
occur.
12