Changing The Settings - Sony SVO-5800 Operating Instructions Manual

Changing the Settings of the Unit — Set-up Menu
Changing the Settings of the Unit — Set-up Menu
Changing the settings
This section describes how to change the settings. For example, changing the
PROTECT MODE of the TAPE PROTECTION menu to STOP. See page 44(E) to
confirm that this is an extended setting and is level 2 of the TAPE PROTECTION
menu.
Displaying the extended settings
1 Press the MENU button.
All the basic settings of the level 1 menu appear on the monitor screen.
The reverse video cursor shows the current selection. The arrow on the right
indicates that there is a lower level setting or condition.
The time counter display of the unit shows the selected setting only.
Level 1 menu display (basic setting)
[SETUP MENU
OPE RAT STE ET 5 | (GOR nm
| (GOR LILI'
Time counter display
AUDIO CONTROL
MENU GRADE
BASIC
Monitor screen
2 Press the [4] button to select "MENU GRADE: BASIC."
A colon (:) in front of BASIC indicates the factory default setting.
Selecting the setting change menu
FU dt
Code number of MENU GRADE (9001)
3 Press the ©! button.
The settings of MENU GRADE are displayed.
The current selection appears on the monitor screen in reverse video. The
arrow on the left indicates that there is an upper level setting. An asterisk (*) in
front of BASIC indicates the factory default setting.
Displaying the settings
SETUP MENU
MeN cess :BASIC
ENHANCED
The code number of
BASIC (00) flashes.
52( E) | Changing the Settings of the Unit — Set-up Menu