Viessmann VITOCELL 140-E Installation And Service Instructions Manual page 22

Heating water buffer cylinder with Vitotrans and without Solar-Divicon
Fitting the cover strips
4.
Fig. 16 Vitocell 140-E, type SEIC, 750 l
Type plate
A
4. Fit the front section of the Vitotrans thermal insula-
tion.
5. Fit the thermal insulation jacket evenly around the
cylinder body by patting it. Start at the back and
progress to the front. This reduces the gap
between the Vitotrans and the cylinder.
22
(cont.)
6.
7.
A
5.
6. Fit the rear cover strip to the thermal insulation.
7. Affix type plate .
A