Technical Characteristics - Master SC23QZ-R Manual

TECHNICAL CHARACTERISTICS

TYPE Gas & Electric Heater, mobile, equipped with Oxygen depletion system and flame failure
Device
Pin code 2531CT‐0032
Dimensions 730x420x352mm
Gas Category I3B/P(30)
Gas Pressure (28‐30)mbar
Type of Gas G30,G31
mixture
Destination LU,NL,DK,FI,SE,CY,CZ,EE,
Countries LT,MT,SK,SI,BG,IS,NO,HR,
RO,IT,HU,LV,BE,GB,FR
Injector Size 0.58mm
Gas Heat input
Gas Consumption
Ignition system
Cylinder Type
Gas hose Certified according to applicable EN‐standard(Recommend 50cm)
Gas regulator Certified according to En16129 (flow rate max.1.5kg/h)
Weight (kg)
OPERATING INSTRUCTIONS:
 There are 3 controls need to be paid attention.
 The first is the valve on the cylinder, which will be used to turn ON and OFF the gas supply.
 The second is the gas control knob with a dial which has 3 positions marked on it.
 This control knob is located on the top end of the heater (fig 4).
 The third is the piezoelectric ignition button next to the gas control knob (fig 4).
 Pressing this button will generate a spark on the pilot burner thus igniting the gas to the pilot
burner.
I3+(28‐30/37)
(28‐30/37)mbar
and their G30 at (28‐30)mbar
G31 at 37mbar
BE,FR,IT,LU,IE,GB,GR,
PT, ES,CY,CZ,LT,CH,SI,LV,SK,TR
0.58mm
Minimum:1.5kW, Medium: 2.8kW, Maximum: 4.1kW
Minimum:109g/h, Medium: 204g/h, Maximum: 298g/h
Piezo electric/ Pulse Ignition /Button Type
Up to 15 kg cylinder
Fig. 4