Table of Contents
Advertisement
13
A
1-3-1
Installing the CPU and CPU Cooler
Read the following guidelines before you begin to install the CPU:
* Make sure that the motherboard supports the CPU.
{Go to GIGABYTE's website for the latest CPU support list.)
* Always turn off the computer and unplug the power cord from the power outlet before installing
the CPU to prevent hardware damage.
* Locale the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly, (Or you may
locate the notches on both sides of the CPU and alignment keys on the CPU Socket.)
* Apply an even and thin layer of thermal grease on the surface of the CPU.
* Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and dam-
age of the CPU may occur.
Set the CPU host frequency in accordance with the CPU specifications. It is not recommended
that the system bus frequency be set beyond hardware specifications since it does not meet the
standard requirements for the peripherals, if you wish to set the frequency beyond the standard
specifications, please do so according to your hardware specifications including the CPU, graph-
ics card, memory, hard drive, etc.
Installing the CPU
LGA1156 CPU Socket
si
3
Pin One Corner of the CPU Socket
LGA1156 CPU
GO
Triangle Pin One Marking
on the CPU
Advertisement
Table of Contents
