Installing The Cpu Cooler - Gigabyte Ultra Durable 3 User Manual

1-3-2 Installing the CPU Cooler
Intel? boxed cooler as the example cooler.)
Step 1:
Apply an even and thin layer of thermal grease
on (he surface of the installed CPU.
Step 3:
Place the cooler atop the CPU, aligning the four
push pins through the pin holes on the mother-
board. Push down on the push pins diagonally.
Step 5
After the installation, check the back of the moth-
erboard. If the push pin is inserted as the picture
above shows, the installation is complete.
Direction of the
Arrow Sign on
the Male Push
Pin
of Female
Push Pin
Fomale
Push Pin
Step 2:
Step 4:
Step 6:
the CPU.
Hardware Installation