Samsung DVD-HR773 User Manual page 135

. Press the ▲▼ buttons to select auto Setup, then press the OK or ▶ button.
The message "Your data will be lost. Press [OK] to continue, [RETURN] to exit." is displayed.
. Press the OK button. Channel scan will be started.
The first frequency band is scanned and the first station found is displayed and stored. And the HDD &
~
DVD RECORDER searches for the second station and so on.
~ The number of stations automatically stored by the HDD & DVD RECORDER depends on the number
of stations that it has found.
M
`
Press the OK button to stop the Auto Setup
Manual Setup
You can add preset channel that Auto Channel Search missed. And you can delete a channel you wish to
remove. You can programme the order of channels.
To setup, follow steps 1 to 3 in "Auto Setup" on page 34.
. Press the ▲▼ buttons to select Manual Setup, then press the OK or ▶ button.
.
Press the ▲▼ buttons to select a Pr (programme) you wish to edit, delete, or swap, then press the
COLOUr button.
Select Edit, Delete or Swap.
in case of Edit (rED(a) button) : You can add or edit PR
~
(programme) information. After change PR informations (CH.,
name, select Save, then press the OK button.
- CH : Tune the channel using ◀▶ buttons.
- name : Display station name automatically detected in
broadcasting signal. If not detected, you can edit name
by using ▲▼◀▶ buttons.
- MFT (Manual Frequency Tunning) : You can tune up the
channel frequency better using ◀▶ buttons.
in case of Delete (grEEn(B) button) : the channel information of
~
selected PR(programme) will be removed.
in case of Swap (YELLOW(C) button) : You can swap the
~
channel information of two PR(programme). For example, if you
wish to swap PR2 and PR5, select swap at PR2, then press the
OK button at PR5.
Manual Setup
PR CH Name
01 002 - - - -
02 004 - - - -
03 - - - - - - -
04 - - - - - - -
05 - - - - - - -
06 - - - - - - -
07 - - - - - - -
Edit Delete Swap
Manual Setup
PR 01
CH 002
Name - - - -
MFT
Save
MOVE SELECT
m s
English _