Samsung DVD-HR773 User Manual page 122
Hide thumbs
Also See for DVD-HR773:
- User manual (337 pages) ,
- Training manual (35 pages) ,
- User manual (100 pages)
Table of Contents
Advertisement
connecting & setting up
COnnECTing THE HDD & DVD rECOrDEr
1.
Disconnect the aerial cable from your TV and connect it to In from aerial connector on the rear panel of the
HDD & DVD RECORDER.
2.
Connect Out to TV connector of the HDD & DVD RECORDER and the aerial input of your TV using the
supplied aerial cable.
3.
Use the Video/Audio Cable to connect ANALOG AUDIO OUT(R/L)/VIDEO OUT jacks on the HDD & DVD
RECORDER to the Audio &Video jacks on the TV.
4.
Plug in the HDD & DVD RECORDER and TV
5.
Turn on the HDD & DVD RECORDER and TV.
6.
Press the inPUT SEL. button on your TV remote control until the Video signal from the HDD & DVD
RECORDER appears on the TV screen.
M
`
The RF cable connection of this product sends only signals of TV.You must connect Audio/ Video cables to watch a
DVD from your HDD & DVD RECORDER.
`
Power off HDD & DVD RECORDER, then you can watch programmes received through 2 RF cable.
_ connecting & setting up
1
Wall
3
2
Advertisement
Table of Contents
