About I.link - Sony HANDYCAM DCR-HC52 Operating Manual

Naistssasss ass pr÷sa_[tisss {gsstiss÷_}
About battery life
• BaUeJy capacity decreases over time mM
through repeated use. If decreased us_ge time
between charges becomes significant, il is
probably time m replace it with a ncw one.
• Each battery's lilt: is governed by storage,
operating and environmental conditions.
The DV Interface on this unit is an i.LINK-
compliant DV Interface. This section
describes the i.LINK standard and its
lieatures.
What is i.LINK?
i.LINK is a digital serial interface lk_r
transferring digital video, digital audio, and
other data to other i.LINK_compatible
devices. You can also control other devices
using the i.LINK.
i.LlNK-compatible devices can be
connected using an i.LINK cable. Possible
applications are operations and data
transactions with various digital AV
devices.
When two or more i.LlNK-compatible
devices are daisy-chained with the unit.
operation becomes possible from any
device in the chain. Note that operation
nmthod may vary, or data transactions may
not be possible, depending on specifications
and characteristics of the connected
devices.
fO Notes
• NornMly, only one device can be connected to
thisunit with an i.LINK cable. When
connecting this unit to an i.LINK-compatible
device having two or more DV Interlaces, rotor
1othe oper_ting instructions of lhe device m be
connected,
"_° Tips
• i.LINK is a more thmiliar term tk)r the IEEE
1394 data transport bus proposed by Sony, and
is a tradenmrk approved by many corporalions.
• IEEE 1394 is an international standard
standardized by the Institute of Electrical and
Electronics Engineers.
Aboutthe i.LINK Baud rate
i.LINK's maximum baud rate varies
according to the device. There are 3 types.
SI00/approx. 100Mbps*)
$200/approx. 200Mbps)
$400 (approx. 400Mbps/
The baud rate is listed under
"Specifications" in the operating
instructions of each piece of equipment. It
is also indicated near the i.LINK interface
on some devices.
The baud rate may differ from the indicated
value when the unit is cmmected to a device
with a different maximum baud rate.
* Whatis Nhps?
Mbps stands lor "megabits per second." or
the amount of data that can be sent or
received in one second. For example, a
baud rate of 100 Mbps means that 100
megabits of data can be sent in one second.
To use i.LINK functionson this unit
For details on how to dub when this unit is
colmected to other video devices having a
DV Interface. see page 44.46.
This unit can also be connected to other
i.LINK (DV Interface) compatible devices
made by Sony (e.g. a VAIO series personal
computer) as well as to video devices.
Some i.LINK compatible video devices.
such as Digital Televisions. DVD.
MICROMV or HDV recorders/players are
not compatible with DV devices. Before
commctiug to other devices, be sure to
confirm whether the device is compatible
with a DV device or not. For details on
precautions and compatible application
software, refer also to the operating
instructions lk_rthe device to be connected.
62