Sony HANDYCAM DCR-HC52 Operating Manual page 35

change the
playback _ (frame)
direction*
plly blck
[I"-SLOWI
slowly** To reverse direction:
(frame) ---+
[I"-SLOWI
play back 2 [_ (double speed)
times faster To reverse direction:
/double speed) [_ (frame)---+
ldouble speed)
play back frame [_ lframe) during
by lhame playback prose.
To reverse direction:
(frame) during
frame playback.
* Horizontal lines may appear at tile top,
bottom, or in the center of tim scrcen. This
is not a malflmction.
**Pictures output l_om tile _ DV Intefl_ce
(i.kINK) cannol be played back smoolllly in
slow Diode.
@ Touch [_ RET.] ---+ _7_.
To return to the normal playback mode,
touch _ (Play/Pause) twice (once from
frame playback).
O Notes
• You will nol hear tile recoMed sound, You may
s_ mosaic-like images of file previously played
picture.
l Jsing the internal stereo microphone
(p. 69), you can add sound to a tape already
recorded in 12-bit mode (p. 42) without
erasing the original sound.
O Notes
• You cmmot record additiomd mulio:
When tile lape has been recorded in lhe 16-bit
mode (p. 42).
Whcn the tape has been recorded in the LP
Diode,
When your camcorder is connected via an
i,LINK cable.
When tile tape has been recorded ill 4CH MIC
Diode on ()tiler canlcorders.
On blank sections of the tape.
Whcn file lape has been rccordcd in a TV
color system ()liter than thal of your
camcorder (p. 59).
When file wrile-protect tab of lhe cassette is
set 1o SAVE (p. 611).
On sections recorded in HDV lormal.
Wllen you add sound, file picture will not be
outpul h'om lhe A/V Remote Conneclor. Check
the picture on file LCD screen or the viewfinder.
You call only record additional audio over a
tape recorded on your camcorder. The sound
may deteriorate when you dub audio on a tape
recorded on other camcorders/including otller
DCR-HC52/HC54 camcorders).
Recording s ound
Insert a recoMed cassette into your
camcorder beforehand.
(2) Slide the POWER switch repeatedly to turn
on the PLAY/EDIT lamp.
@ Touch [_ (Play/Pause) to play back the
tape, then touch it again at the point where
you want to start recording the sound.
@ Touch _ ---+ [PAGE3] ---+ [A DUB
CTRL] ---+[AUDIODUB].
|| appears.
(_) Touch _ (Play).
Your camcorder starts audio recording via
the internal stereo microphone.
appears while recording the new sound
in stereo 2/ST2) during the playback of the
tape.
(_) Touch _ (Stop) when you want to stop
recording.
To dub on other scenes, repeat step @ to
select scenes, then touch [AUDIO DUB].
Continued._
35
==
g