Sony HANDYCAM DCR-HC52 Operating Manual page 33

BLACK
MOSC. FADER
MONOTONE
When fading in, the picture gradually
changes lhom black and white to color.
When fading out, it gradually changes from
color to black and white.
You can adjttst the color balance to the
brightness of the recording environment.
I,, AUTO
The white bahmce is at[lusted
automatically.
OUTDOOR ( _÷1
The _hite balance is apprOl_li acly
adjusted for the following recording
conditkms:
Outdoors
Night views, neon signs and fireworks
Sunrise or sunset
Under daylight fluorescent lamps
INDOOR (:_-)
The _qfite balance is appropri acly
adjusted for the following recording
conditions:
Indoors
AI party scenes or sltldii)s where the lighting
conditions change quickly
Under vide*_ lamps in a studio, or under
sodium lamps or incandescent-like color
lamps
ONEPUSH (_=_)
The white balance will be ac{justcd
according to the ambient light.
(_) Touch [ONE PUSH].
O Frame a white ol!ject such as a piece of
paper, to fill the screen under the same
lighting conditions as you will shoot
the subject.
@ Touch [_.
txmz_ flashes quickly. When the white
balance has been acljusted and stored in
the memory, the indicator stops
flashing.
0 Notes
• Sct [WHT BALl to [AUTO] or [ONE PUSH]
undcr white or cool while fluorescent lamps.
• When you select [ONE PUSH], keep fiaming
white oF!iect while _mLI is flashing quickly.
• txm_d flashes slowly if [ONE PUSH] could not
be set.
• When [ONE PUSH] was selected, if _xm.,dkeeps
flashing al_er touching [_ , set [WHT
BALI to [AUTO],
• If you set [WHT BALI, [SCENE SELl seoing is
canceled.
"_" Tips
• B you have changed the batte]y pack while
[AUTO] was selected, or taken your camcorder
outdoors after inside use with tile [EXPOSURE]
set (or vice versa h select ]AUTO] and aim your
calncorder at a nearby white object for about 10
sec'.lnds lot better coh)r balance adjustment.
• When the while balance has been set with [ONE
PUSHI, if you change the [SCENE SEL.I
settings, or bring your calncorder outdoors _lOll)
inside the house, or vice versa, you need to redo
the ]ONE PUSHI procedure to rea({iusl file
white bahmce.
I,,.ON
A beeping sound starts when you start/stop
recording, or operate the touch paneh
OFF
Cancels the beeping sound aM shutter
sound.
,_=
g
Continued-_
33