Sony HANDYCAM DCR-HC52 Operating Manual page 28

Playingthe pictureon a TV
You can connect your camcorder to the input jack of a TV or a VCR using the A/V connecting
cable ([_) or the A/V colmecting cable with S VIDEO ([_). Connect your camcorder to the
wall outlet (wall socket) using the supplied AC Adaptor lk_rthis operation (p. 121. Refer also
to the instruction mauuals supplied with the devices to be connected.
(
Device without an
S VIDEO jack
IN
VIDEO
(Red)
r
Device with an
S VIDEO jack
JN S VIDEO
(Black)
VIDEO
®
(White)
. _ ®lo i
AUDIO
/Red)
(YeUow)
VCRs or TVs
[] A/V connecting cable (supplied)
Connect 1o file input jack ol anolher de_ice.
[] A/V connecting cable with S
VIDEO (optional)
Wllcn connecting to another device via the S
VIDEO jack, by using tile A/V connecting
cable wilh an S VIDEO cable, pictures can be
reproduced more l]61hfully lhan wilb lhe
supplied A/V cable connection.
Connect lhe wlfile and rcd plugs (lel}Mgla
audio) and S VIDEO plug (S VIDEO
cllannel) of an A/V connecling cable. In tills
case, the yellow (slandard video) plug
connectkm is not necessary. S VIDEO
connection only will nol oulput audio,
"_° Tips
• You can display tile time code on tile TV scrcen
by selling [DISP OUT] to [V-OUT/LCDI
(p, 431.
When connectingyour camcorderto a
TVthrougha VCR
Connect your camcoMer to the LINE IN
input on the VCR. Set the input selector on
the VCR to LINE (VIDEO 1. VIDEO 2.
etc.), if the VCR has :m input selector.
When yourTV is monaural (0nly one
audioinputjack)
Couuect the
yellow plu_
of the A/V
connecting cable to the video input jack and
connect the white (lefl channel) or the red
(right channel) plug to the audio input jack
of your TV or VCR.
28