Roland RDE-1641 Manual Instruction page 33

ROUBLESHOOTING
PROBLEM
The bread maker is not switched on.
The symbols «HHH» appear on the
display
The symbols «LLL» appear on the
display when you switch the bread
maker on.
The symbols «ee0» appear on the
display when you switch the bread
maker on.
Smoke from the lid (3) ventilation
openings
The baked bread dropped, the bot-
tom part of the bread is damp
The bread has stuck to the walls of
the baking form
The bread structure is not homoge-
neous or the bread went wrong
The bread structure is not homoge-
neous or the bread went wrong
POSSIBLE REASON
The bread maker has not
cooled down after the previ-
ous baking cycle
The temperature inside the
bread maker is too low.
The temperature sensor
works improperly
Ingredients got onto the heat-
ing element
The bread has stayed in the
bread maker for too long after
baking
The bottom part of the bread
has stuck to the kneading
paddle
Wrong mode is selected
Accidental pressing of
«START/STOP» button during
the operation process
Frequent opening of the lid
during the operation process
A long power cutoff during
the operation process
The paddle is blocked
33
SOLUTION
Switch the bread maker off and unplug it.
Remove the baking form and let the bread
maker cool down to the room temperature.
Switch the bread maker off and unplug it.
Open the bread maker lid, remove the bak-
ing form and let the bread maker heat up to
the room temperature for 10-20 minutes.
In this case contact the authorized service
center
Switch the unit off and unplug it. Open
the lid, take the form out, let the unit cool
down. Wipe the walls of the process cham-
ber and the heating element with a damp
cloth, then wipe them dry.
When making bread according to this rec-
ipe switch the unit off right after the bread
is ready
Before installing grease the paddles with
margarine or vegetable oil
View the available baking programs, select
another program.
Load all necessary ingredients again and
start the baking process from the very
beginning
Open the lid only in case of urgency and at
the early stage of the automatic program
operation.
Load all necessary ingredients again and
start the baking process from the very
beginning
Take the form out and check if the drive is
rotating. If there is any malfunction, apply
to an authorized service center.
ENGLISH