Table of Contents
Advertisement
www.ti.com
Without a device, BQStudio operates with reduced functions. Tools can be browsed and data fields inspected,
but data cannot be entered.
The dashboard on the left-side of the window shows the adapter, device and simple voltage and current
displays. The dashboard updates periodically unless Auto Refresh is stopped by clicking on the banner. The
right side of the window has the Commands panel.
The center panel of the window initially shows the Registers tab. The register display shows device status
registers and is read once when the device is detected. To update the register values select the Refresh button
at the top of the Registers tab. To repeatedly read the registers select the Scan button. To repeatedly read and
log the register values to a file select the Start Log button and follow the prompts to save a log file. When a log
is running, select Stop Log to end the log and close the file. The Parameter View selection allows the choice of
basic parameters which shows commonly used registers, or all parameters which shows more registers.
If a device is connected and powered after BQStudio is powered, then the dashboard auto-detects the device
and update the device and register display.
SLUUCY9 – NOVEMBER 2023
Submit Document Feedback
Figure 4-2. BQStudio Window without Device
Figure 4-3
shows a register display with a connected device.
Copyright © 2023 Texas Instruments Incorporated
Software
BQ76905 Evaluation Module
13
Advertisement
Table of Contents
