Basic Operations.10 - Technics SL-MC410 Operating Instructions Manual

| r ;Sequentiial
Basic operations
The changer plays all the tracks on all the discs in order and stops
automatically when the last track on the last disc finishes playing.
Before starting, load your discs.
D Press POWER.
The unit will switch on.
Momentarily, the message "CHECKING DISCS" will appear
on the display.
When it goes out, the last disc played will be displayed.
The " ^ " indication will illuminate.
The disc number, the track number and the elapsed play time
will be displayed.
The disc number is the same as the slot number.
POWER
To search for the desired position
SEARCH/CHARACTER
To skip tracks
SKIP/CURSOR
To skip discs
(For detailed information concerning these buttons, please refer to
pages 20—21.)
Press IS.
The disc number and the total number of tracks of the current disc
will be displayed.
The total playing time displayed includes the silent sections
between tracks. For this reason, it may be a few seconds longer than
the playing time indicated on the disc.
When you open the front panel, the total number of tracks and the
total playing time go out.
It takes roughly 3 seconds from the time you press
SI
until the disc
is returned to the slot.
To temporarily stop play El
Press ► to resume play.
T^ACK