Program Play.10 - Technics SL-MC7 Operating Instructions Manual

I
Program play
j To check programmed contents B_
I (Only available from the remote control.)
i
I Press [RECALL].
i The programmed tracks are displayed in order each time it is
I pressed.
I To cleor programmed contents_
(Only available from the remote control.)
I [In the stop mode]
\
To clear a specific item from the program
I Press recall until the item is displayed, then press [CLEAR],
I
I To clear the last item on the program
j
Press (CLEAR).
To clear the entire contents of the program
Press [■].
To cancel the program mode
[In the stop mode]
Press [PROGRAM].
I The [PROGRAM] indicator goes out.
The contents of the program are stored in the memory.
To replay your program
1. Press [PROGRAM]..
2. Press [►].
Special note on recording programs
The changer needs time to change the discs and find the tracks.
Consequently, it will take the changer slightly longer than the total
track time to record everything. Exactly how much longer depends
on the contents of the program.
11
RQT4941