Basic Operations; Sequential Play - Technics SL-PD988 Operating Instructions Manual

;
j
j
_ Basic operations
Sequential play
All of the discs will be played, beginning from track 1 on the
selected disc.
Í 5 DISC SKIP 2 4
The explanation below is an example of operation in the case
where all five disc trays in the changer are holding CDs.
PoweR Press POWER. OPENCLOSE Press OPEN/CLOSE again
The unit will switch on. to close the loading drawer.
Do not attempt to close the drawer by
hand.
E EA
EES ENEN ED EE ees ent oa
ehh. Bente
Current play position (The numeral illumi-
92 oeencLoseE
Press OPEN/CLOSE to open
Hales with a:fed color)
the loading drawer.
Indicates that the loading drawer is
open.
Iiuminates when a disc is in the disc tray. If
there is no disc in the disc tray, the indication
S disappears when the disc tray comes to the
Numbers of the trays in which discs play position.
are loaded.
Disc tray Carousel Disc number next number.
Label must face
Disc number in play Elapsed play time
upward.
p AN
A >
CED EN I
c- c->
e Do not load 3" (8 cm) and 5" (12 cm) discs on the same disc tray.
E
è Do not use irregular shape CDs (heart-shape, octagonal, etc.).
Track number in play
Play indicator
(560 page 78] SL-PD988 onl
The illumination of a disc button indicates that there
CAUTION is a disc in the corresponding tray. During play, the
in motion, and do not attempt to rotate the carousel by hand;
ee
doing so could result in incorrect operation of the unit and/or Í
damage to the discs. The changer plays all the tracks on all the discs in order and
stops automatically when the tast track on the last disc finishes
playing. The first disc wili then be at the playing position.