Disc Grouping Play.13 - Technics SL-MC410 Operating Instructions Manual

Disc grouping play
wm
i ■ ;
m,
s
With disc grouping play, you can register discs under any of five
available groups (A-E) and then play back only the discs in a
specific group.
• The same disc can be registered in as many groups as you like.
• Each group can hold up to 110 discs.
» You can name each group.
[During sequential play or while it is on stop]
Select a disc.
DISC GROUPING PLAV
Eminem]
To select a disc from 1 to 9
For example: "6"
To select disc from 10 to 110
For example: "19"
Push the buttons within 7 seconds of each other.
You cannot select slot No. 0.
GROUP ENTER
ENTER
For your reference
You can select discs with the DISC SKIP - and + buttons.
[Within 7 seconds]
Press GROUP ENTER.
If any groups have been registered already, their letters will
light up.
[Within 7 seconds]
Press the DISC GROUPING PLAY button you want.
(This inputs the disc into the group.)
GROUP S3 flSB ta
DISC GROUPING PLAY
pnrBimrpirri
For example: To input a disc in group A.
Press®.
Repeat steps 1, 2 and 3 until you have completed
all items.
To cancel disc grouping play mode
[In the stop mode]
Press the DISC GROUPING PLAY button indicated on
the display.
Tire group indication on the display will go out.
For your reference
The group contents will remain stored in memory even after the
unit is switched off.
However, if the power cord is unplugged or the power supply is
otherwise interrupted for an extended length of time, the contents
will be erased from memory.