Preparing The Remote Control; Power Supply - Panasonic DVD-PA65 Operating Instructions Manual

Preparing the remote control
insert the battery
{Lithium battery)
=
a
=
©
—
n
=
=
=
0
oS
Face @ upwards.
@ Replacing the button-type battery
The battery normally lasts for about a year.
Replace if the remote contro! fails to oper-
ate the unit when used within the operation
range.
Refer to "PRECAUTIONS" on pages 6 and 7.
Remote control
signal sensor
About 7 m
(23 feet) in
front of the
signal sensor
Do not expose the remote control signal
sensor to bright light.
eDo not place obstacles between the re-
mote control signal sensor and the re-
mote control.
Do not use another units remote control
10 at the same time.
RQTS603
Power supply
Back of
the unit
Household AC
outlet
(AC 120 V, 60 Hz)
A
Lasd)
The [(b] indicator lights.
a are
4 Front of this unit
{
Refer to "PRECAUTIONS" on page 6.
The unit is in the standby condition (the
[O] indicator lights) when the AC power
supply cord is connected. The primary
circuit is always "live" as long as the AC
adaptor is connected to an electrical
outlet.
E When the unit is not going to be used
for a long time
The unit consumes 2 W when in standby
mode.
To conserve power, disconnect the AC
power supply cord from the AC outlet.