Panasonic DVD-PA65 Operating Instructions Manual page 33

Connecting other equipment
Refer to the relevant pages for connection. Initial settings that need to be changed are indi-
cated in inverted commas ("").
Enjoy Dolby Digital "7 Speaker Setting"
and DTS surround Use the unit's built-in
sound with 3 or more | decoders and connect to 34, 38
speakers an amplifier with
5.1-channel inputs.
"6 Digital Audio Output"
Connect digitally and use 35. 40
the decoder in another í
piece of equipment.
Connect 2 speakers "7 Speaker Setting"
to enjoy stereo sound | Connect to a mini-system
or amplifier {including 36, 38
Dolby Pro Logic
amplifiers).
"6 Digital Audio Output"
Connect digitally to a 36, 40
mini-system or amplifier.
Record to a cassette | Analogue recording "7 Speaker Setting 37, 38
or MD deck Digital recording "6 Digital Audio Output" | 37, 40
Peripheral equipment and cables shown on pages 34 to 37 sold separately un-
less otherwise indicated.
If digital connection is used, DVD-Audio linear PCM signals are converted to 48 kHz for out-
put. Use analogue connection to enjoy high quality 192 kHz and 96 kHz audio.
"192 kHz" lights on the unit's display to indicate —— |
192 kHz software is being played. ( agente' |
e Disconnect all units from the AC power supply before commencing connection.
Read through the instructions before connecting other equipment.
a
o
—
o
Led
a
—
a
ce
—
=
J
D
Lu
[=]
Le
ROT5603