Sony HANDYCAM DCR-HC30 Operation Manual page 103

To end Digital programediting
Touch [END].
To save a programwithout using it to
record
Touch [END] in slop l 1.
The program is stored in memory until lhe
cassette is ejected.
To erase programs
1 Follow steps 1 to 6 in "Recording the
selected scenes as programs" (p. 101),
then touch [UNDO].
2 Touch [DEL 1MARK[ to delete the last
set program. Or, touch [ALL ERASE] to
erase all the programs.
3 Touch [EXECI.
The programs are deleted.
To cancel |his operalion, touch [CANCEL].
0 Notes
• You cannot set starting point or ending point on a
blank section of the tape. If there is a blank section
between the starting and ending point of the
program, tile total time may not appear correctly.
• When you cannol operate the device correctly using
an i.LINK cable connection, select [IR l in step I 1 on
p. 98, and set the [IR SETUP] code.
/
€
m
t_
Dubbing/Editing 103