Using A Microphone Or Guitar; Illumination Effects - Panasonic SC-TMAX45 Operating Instructions Manual

Connecting additional units
You can connect to additional units to enjoy sound output
from these units.
It is recommended to place all units vertically.
Preparation
Switch off all the units and turn [VOLUME] of each unit to
reduce the volume level.
Main unit
(rear)
Audio
cable
(not
supplied)
1
Connect main unit and all the additional units
(SC-TMAX45 or SC-TMAX15) with audio cables
(not supplied).
Plug type: Ø 3.5 mm stereo
2
Switch on all the units.
3
On the additional units:
Press [INPUT SELECTOR] repeatedly to select
"AUX".
4
Press [SPEAKER MODE] repeatedly to select the
desired speaker channels.
L+R: left and right channels
L: left channel
R: right channel
5
On main unit:
Start your desired playback.
Note:
•
You can connect this unit and up to two additional units.
•
The sound effect will be controlled separately by each unit.
Make the same sound settings on the additional units if
necessary.
•
The illumination and strobe lights effects on the additional
units may differ from the main unit even when same
illumination pattern is selected.
8
8
Additional Additional
unit (rear) unit (rear)
Audio
cable
(not
supplied)

Using a microphone or guitar

Preparation
Turn [MIC LEVEL] and [GUITAR LEVEL] to their minimum
before you connect or disconnect a microphone/guitar.
Microphone
(not supplied)
1
Connect a microphone or guitar.
Plug type: Ø 6.3 mm monaural
2
Adjust the volume of microphone or guitar.
For microphone: Turn [MIC LEVEL].
For guitar: Turn [GUITAR LEVEL].
3
If you want to sing with the background music,
play the music source and adjust the volume of
the system.
Adjust echo level
Turn [ECHO] to adjust the echo level of the
microphone.
Note:
• If a strange noise (howling) is emitted, move the
microphone/guitar away from the speakers, or decrease the
volume of the microphone/guitar.
•
When you do not use the microphone/guitar, disconnect it
from the microphone/guitar jack, and decrease the volume
of the microphone/guitar to its minimum.

Illumination effects

You can change the illumination effect on the unit.
Turn [ILLUMINATION] to select the effect.
Audio cable
(not supplied)
Guitar
(not supplied)
Strobe light
Illumination light
Strobe light