Note On Ac Mains Lead; Supplied Accessories - Panasonic SC-TMAX45 Operating Instructions Manual

THE FOLLOWING APPLIES ONLY IN THE U.S.A.
Caution: The user is cautioned that changes or
modifications not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
FCC ID: ESX-TMAX45 (for SC-TMAX45)
ESX-TMAX15 (for SC-TMAX15)
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.

Note on AC mains lead

(For the AC mains plug of three pins)
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC
mains plug (figures A and B). Confirm the AC mains plug
fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Figure A
2. Replace the fuse and close or attach the fuse cover.
Figure A
Fuse (5 ampere)

Supplied accessories

Check and identify the supplied accessories.

1 Optical cable
(TSXF231)

For Latin America
1 AC plug adapter
(TSXX212)

For Latin America
1 AC mains lead
(TSXA226)
For India
1 AC mains lead
(TSXA231)
For others
4 AC mains lead
For Hong Kong
(TSXA227)
For Thailand
(TSXA229)
For Australia and New Zealand
(TSXA228)
Except for Hong Kong, Thailand, Australia and New Zealand
(TSXA226)
Note:
Use the AC mains lead that is suitable for your household
mains socket.
Figure B
Fuse cover
Figure B
Fuse (5 ampere)
3
3