Toro 74661 Operator's Manual page 2

This product complies with all relevant European directives;
for details, please see the separate product specific Declaration
of Conformity (DOC) sheet.
Gross Horsepower
The gross or net horsepower of this engine was laboratory
rated by the engine manufacturer in accordance with the
Society of Automotive Engineers (SAE) J1940. As configured
to meet safety, emission, and operating requirements,
the actual engine torque on this class of mower will be
significantly lower.
Go to www.Toro.com to view specifications on your mower
model.
Important: If you are using a machine with a Toro
engine above 1500 m (5,000 ft) for a continuous period,
ensure that the High Altitude Kit has been installed so
that the engine meets CARB/EPA emission regulations.
The High Altitude Kit increases engine performance
while preventing spark-plug fouling, hard starting, and
increased emissions. Once you have installed the kit,
attach the high-altitude label next to the serial decal
on the machine. Contact any Authorized Toro Service
Dealer to obtain the proper High Altitude Kit and
high-altitude label for your machine. To locate a dealer
convenient to you, access our website at www.Toro.com
or contact our Toro Customer Care Department at the
number(s) listed in your Emission Control Warranty
Statement.
Remove the kit from the engine and restore the engine
to its original factory configuration when running the
engine under 1500 m (5,000 ft). Do not operate an engine
that has been converted for high-altitude use at lower
altitudes; otherwise, you could overheat and damage
the engine.
If you are unsure whether or not your machine has been
converted for high-altitude use, look for the following
label (Figure 3).
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 3
Introduction
This machine is a ride-on, rotary-blade intended to be used
by homeowners in residential applications. It is primarily
designed for cutting grass on well-maintained lawns. It is not
designed for cutting brush, mowing grass and other growth
alongside highways, or for agricultural uses.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
safety and operation training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready.
model and serial numbers on the product. Write the numbers
in the space provided.
1. Model and serial-number plate
Write the product model and serial numbers in the space
below:
Model No.
decal127-9363
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety-alert symbol
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
2
Figure 1 identifies the location of the
Figure 1
Under the seat
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g188142
(Figure 2),