Second Press Cable Kit, 25A106 - Graco Fluid Automation F4 Series Manual

Second Press Cable Kit, 25A106

This kit contains cables for making connections from the
electronic enclosure to the barrel mixing stack and the
press when using a second press with the F4-5 and
F4-55 machines.
Connection at
Electronic
Enclosure
Press Cable
Connection at Press
1. Connect the press cable to the electronic enclosure
at the connection marked Press 2.
2. Refer to the Fluid Automation F4 Series
Setup-Operation manual 335028 for information
about connecting the cable to the press.
3A3103A
Connection at
Electronic
Enclosure
Barrel Mixing
Stack Cable
Connection at Stack
3. Connect the cable for the barrel mixing stack to the
electronic enclosure at the connection marked
Stack 2.
4. Connect the splitter cord to the stack's solenoid
block at the two outer connections (A and B).
B
C1
A
Installation
Cable Connects Here
9