Material In-Line Filters - Graco Fluid Automation F4 Series Manual

Installation

Material In-line Filters

Two in-line filter options are offered for the F4-5 and
F4-55. These are installed between the barrel mixing
stack and the press. They filter the material coming from
the stack to help prevent clogging.
In-line Filter, SA925-1A
This filter is for a 3/4 in. npt connection. If a material reg-
ulator is used, the filter should be installed between the
stack and the regulator.
12
In-line Filter, SA926-1A
Top of Filter
Stack Connects
Here
Bottom of Filter
To Press
This filter is for a 1/2 in. npt connection. If a material reg-
ulator is being used, the filter should be installed
between the stack and the regulator.
Top of Filter
Stack Connects Here
Bottom of Filter
To Press
3A3103A