Graco 395 Repair Manual page 18

Stored Data (Not available on all sprayers)
The SmartControl contains stored data to assist with troubleshooting and maintenance. To view this stored data on
the digital display, proceed as follows:
1.
Relieve pressure; page 4.
2. Plug in sprayer.
3. Hold down display button and turn sprayer ON.
Data Point
1
2
3
4
18
309674
Pressure Control Repair
Definition
Number of hours power switch has been ON with power applied
Number or hours motor has been running
Last error code. Press and hold display button to clear error code to E=00
Software revision
4. Release display button about 1 second after
turning on sprayer.
Sprayer model number displays (U395, U495) for a
few seconds and then data point 1 is displayed.
5. Push display button and next data point displays.
6. Turn sprayer OFF and then ON to leave stored
data mode.