Table of Contents
Advertisement
Administrator's Guide
❏ IKEv2
The following items are displayed when you select IKEv2 for IKE Version.
Items
Local
Authentication Method
ID Type
ID
Pre-Shared Key
Confirm Pre-Shared
Key
Remote
Authentication Method
ID Type
ID
Pre-Shared Key
Confirm Pre-Shared
Key
Encapsulation
If you select IPsec for Access Control, you need to configure an encapsulation mode.
Items
Transport Mode
Advanced Security Settings for Enterprise
Settings and Explanation
If you select IPsec for Access Control, select an option. Used certificate is
common with a default policy.
If you select Pre-Shared Key for Authentication Method, select the type of
ID for the printer.
Enter the printer's ID that matches the type of ID.
You cannot use "@", "#", and "=" for the first character.
Distinguished Name : Enter 1 to 255 1-byte ASCII (0x20 to 0x7E) characters.
You need to include "=".
IP Address : Enter IPv4 or IPv6 format.
FQDN : Enter a combination of between 1 and 255 characters using A-Z, a-z,
0-9, "-", and period (.).
Key ID : Enter 1 to 255 1-byte ASCII (0x20 to 0x7E) characters.
If you select Pre-Shared Key for Authentication Method, enter a pre-shared
key between 1 and 127 characters.
Enter the key you configured for confirmation.
If you select IPsec for Access Control, select an option. Used certificate is
common with a default policy.
If you select Pre-Shared Key for Authentication Method, select the type of
ID for the device that you want to authenticate.
Enter the printer's ID that matches to the type of ID.
You cannot use "@", "#", and "=" for the first character.
Distinguished Name : Enter 1 to 255 1-byte ASCII (0x20 to 0x7E) characters.
You need to include "=".
IP Address : Enter IPv4 or IPv6 format.
FQDN : Enter a combination of between 1 and 255 characters using A-Z, a-z,
0-9, "-", and period (.).
Key ID : Enter 1 to 255 1-byte ASCII (0x20 to 0x7E) characters.
If you select Pre-Shared Key for Authentication Method, enter a pre-shared
key between 1 and 127 characters.
Enter the key you configured for confirmation.
Settings and Explanation
If you only use the printer on the same LAN, select this. IP packets of layer 4 or later are
encrypted.
80
Advertisement
Table of Contents
