Table of Contents
Advertisement
Administrator's Guide
Importing a CA-signed Certificate
Import the obtained CA-signed Certificate to the printer.
Important:
c
❏ Make sure that the printer's date and time is set correctly. Certificate may be invalid.
❏ If you obtain a certificate using a CSR created from Web Config, you can import a certificate one time.
1. Access Web Config and then select the Network Security tab. Next, select SSL/TLS > Certificate, or IPsec/IP
Filtering > Client Certificate or IEEE802.1X > Client Certificate.
2. Click Import
A certificate importing page is opened.
3. Enter a value for each item. Set CA Certificate 1 and CA Certificate 2 when verifying the path of the
certificate on the web browser that accesses the printer.
Depending on where you create a CSR and the file format of the certificate, required settings may vary. Enter
values to required items according to the following.
❏ A certificate of the PEM/DER format obtained from Web Config
❏ Private Key: Do not configure because the printer contains a private key.
❏ Password: Do not configure.
❏ CA Certificate 1/CA Certificate 2: Optional
❏ A certificate of the PEM/DER format obtained from a computer
❏ Private Key: You need to set.
❏ Password: Do not configure.
❏ CA Certificate 1/CA Certificate 2: Optional
❏ A certificate of the PKCS#12 format obtained from a computer
❏ Private Key: Do not configure.
❏ Password: Optional
❏ CA Certificate 1/CA Certificate 2: Do not configure.
4. Click OK.
A completion message is displayed.
Note:
Click Confirm to verify the certificate information.
Related Information
"Accessing Web Config" on page 23
&
"Logging on to the Printer Using Web Config" on page 35
&
"CA-signed Certificate Importing Setting Items" on page 67
&
Advanced Security Settings for Enterprise
66
Advertisement
Table of Contents
