Table of Contents
Advertisement
15.4 Activating Wi-Fi on the
appliance
Requirements
The Home Connect menu is called
¡
up.
→ "Calling up the Home Connect
menu", Page 36
The display shows oFF.
¡
Press
to change the setting.
▶
The display shows on if the Wi-Fi
a
is activated.
Note: If the Wi-Fi is activated, the dis-
play alternately shows on and the
signal strength of the Wi-Fi connec-
tion.
15.5 Deactivating Wi-Fi on the
appliance
Requirements
The Home Connect menu is called
¡
up.
→ "Calling up the Home Connect
menu", Page 36
The display shows on.
¡
Press
to change the setting.
▶
The display shows oFF if the Wi-Fi
a
is deactivated.
15.6 Resetting the appliance
network settings
Requirements
The Home Connect menu is called
¡
up.
→ "Calling up the Home Connect
menu", Page 36
The display shows rEs.
¡
Press and hold
▶
3 seconds.
The network settings are reset.
a
for at least
15.7 Remote start
Enable the appliance for remote start
via the Home Connect app.
Note
Remote start is deactivated for safety
reasons in the following
circumstances:
The appliance door is opened.
¡
¡
Remote Start
Following a power cut.
¡
Activating remote start
Requirements
The appliance is connected to your
¡
home WiFi network.
The appliance is connected to the
¡
Home Connect app.
A programme is selected.
¡
The appliance door is closed.
¡
Press Remote Start .
▶
lights up and the appliance is
a
enabled for remote start via the
Home Connect app.
Deactivating remote start
Press Remote Start .
▶
goes out.
a
15.8 Remote diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the Home Con-
nect server and if Remote Dia-
gnostics is available in the country in
which you are using the appliance.
Tip: For further information and de-
tails about the availability of Remote
Diagnostics in your country, please
visit the service/support section of
your local website: www.home-con-
nect.com.
Home Connect en
is pressed.
37
Advertisement
Table of Contents
