Setting Up The Home Connect App; Setting Up Home Connect; Activating Wi-Fi On The Appliance; Deactivating Wi-Fi On The Appliance - Siemens WM6HXE0PDN User Manual And Installation Instructions

en Home Connect
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
16.1 Setting up the
Home Connect app
Install the Home Connect app on
1.
the mobile device.
Start the Home Connect app and
2.
set up access for Home Connect.
The Home Connect app guides
you through the entire login pro-
cess.
16.2 Setting up Home Con-
nect
Requirements
¡ The Home Connect app has been
installed on your mobile device.
¡ Wi-Fi has been activated on the
router.
¡ The appliance is receiving signals
from the WLAN home network (Wi-
Fi) at its installation location.
Use the Home Connect app to
1.
scan the QR code.
40
Follow the instructions in the
2.
Home Connect app.
16.3 Activating Wi-Fi on the
appliance
Note: When Wi-Fi is activated, the en-
ergy consumption increases in com-
parison to the values specified in the
consumption value table.
Press and hold
1.
seconds.
Select Wi-Fi on / off.
2.
Select on.
3.
a Wi-Fi is activated.
Note: If Wi-Fi is activated, the appli-
ance will not switch itself off automat-
ically.
16.4 Deactivating Wi-Fi on the
appliance
Press and hold
1.
3 seconds.
Select Wi-Fi on / off.
2.
Select off.
3.
a Wi-Fi is deactivated
Note: The connection is automatically
re-established when the Wi-Fi is
switched back on.
16.5 Resetting the appliance
network settings
Press and hold
1.
3 seconds.
Select Network settings.
2.
Select Reset.
3.
a The network settings are reset.
for approx. 3
for at least
for at least