16.1 Setting up the
Home Connect app
Install the Home Connect app on
1.
your mobile device.
Start the Home Connect app and
2.
set up access for Home Connect.
The Home Connect app guides
you through the entire login pro-
cess.
16.2 Setting up Home Con-
nect
Requirements
The Home Connect app has been
¡
installed on your mobile device.
The appliance is receiving signals
¡
from the WLAN home network (Wi-
Fi) at its installation location.
Press and hold Remote Start
1.
approx. 3 seconds.
Follow the instructions in the
2.
Home Connect app.
16.3 Activating Wi-Fi on the
appliance
Press and hold Remote Start
1.
approx. 3 seconds.
Press Remote Start
2.
until the display shows "oFF".
Press
to activate the Wi-Fi.
3.
The display shows "on".
a
Notes
If the Wi-Fi is activated, the display
¡
alternately shows "on" and the sig-
nal strength of the Wi-Fi connec-
tion.
To exit the Home Connect settings,
¡
press and hold Remote Start
approx. 3 seconds.
for
for
repeatedly
for
16.4 Deactivating Wi-Fi on the
appliance
Press and hold Remote Start
1.
approx. 3 seconds.
Press Remote Start
2.
until the display shows "on".
Press
to deactivate the Wi-Fi.
3.
The display shows "oFF".
a
Note: To exit the Home Connect set-
tings, press and hold Remote Start
for approx. 3 seconds.
16.5 Resetting the appliance
network settings
Press and hold Remote Start
1.
approx. 3 seconds.
Press Remote Start
2.
until the display shows rEs.
Press and hold
3.
3 seconds.
The network settings are reset.
a
16.6 Remote start
Enable the appliance for remote start
via the Home Connect app.
Note
Remote start will be deactivated in
the following circumstances:
The appliance door is opened.
¡
¡
Remote Start
Following a power cut.
¡
Activating remote start
Requirements
The appliance door is closed.
¡
The detergent drawer has been
¡
pushed in.
Press Remote Start .
▶
lights up and the appliance is
a
enabled for remote start via the
Home Connect app.
Home Connect en
repeatedly
repeatedly
for approx.
is pressed.
for
for
37