Table of Contents
Advertisement
en Home Connect
16.2 Setting up Home Con-
nect
Requirements
The Home Connect app has been
¡
installed on your mobile device.
Wi-Fi has been activated on the
¡
router.
The appliance is receiving signals
¡
from the WLAN home network (Wi-
Fi) at its installation location.
Press and hold Remote Start
1.
approx. 3 seconds.
Follow the instructions in the
2.
Home Connect app.
16.3 Home Connect menu
The Home Connect menu contains
all of the Home Connect settings.
Calling up the Home Connect
menu
Press and hold Remote Start
▶
at least 3 seconds.
The display shows the first setting
a
of the Home Connect menu.
Navigating in the Home Connect
menu
Briefly press Remote Start
▶
the display shows the required set-
ting.
Exiting the Home Connect menu
Press and hold Remote Start
▶
at least 3 seconds.
16.4 Activating Wi-Fi on the
appliance
Requirements
The Home Connect menu is called
¡
up.
→ "Calling up the Home Connect
menu", Page 38
The display shows oFF.
¡
38
Press
▶
The display shows on if the Wi-Fi
a
is activated.
Note: If the Wi-Fi is activated, the dis-
play alternately shows on and the
signal strength of the Wi-Fi connec-
tion.
16.5 Deactivating Wi-Fi on the
for
Requirements
The Home Connect menu is called
¡
up.
→ "Calling up the Home Connect
menu", Page 38
The display shows on.
¡
Press
▶
The display shows oFF if the Wi-Fi
a
is deactivated.
16.6 Resetting the appliance
for
Requirements
The Home Connect menu is called
¡
up.
→ "Calling up the Home Connect
menu", Page 38
The display shows rEs.
¡
until
Press and hold
▶
3 seconds.
The network settings are reset.
a
16.7 Remote start
for
Enable the appliance for remote start
via the Home Connect app.
Note
Remote start is deactivated for safety
reasons in the following
circumstances:
The appliance door is opened.
¡
¡
Remote Start
Following a power cut.
¡
to change the setting.
appliance
to change the setting.
network settings
is pressed.
for at least
Advertisement
Table of Contents
