Table of Contents
Advertisement
1 • Getting started
Read the safety instructions in the "Precautions" section
before use.
To use your phone, you must insert a valid SIM card
supplied by your GSM operator or retailer. The SIM
card contains your subscription, your mobile number,
and memory in which you can store phone numbers
and messages (see "Contacts" page 12).
Insert the SIM card
Make sure the phone is switched off before removing
the battery.
1.
Press on the back cover clip of the phone, slide
the cover downwards and lift it up to remove it.
Getting started
2.
Remove the battery by lifting it to the right
using the black notches as shown below.
3.
Remove the SIM card from its holder and slide it
in its slot until it stops. Be careful that the
connectors are facing downwards and that the
clipped corner of the card is in the correct
corner.
4.
Insert the battery: first place its right side
(connectors downwards) against the right edge
of the phone and press until it clips.
1
Advertisement
Table of Contents
