Table of Contents
Advertisement
To receive a second call, you must have deactivated the
Call forward for voice calls (see page 51) and activated
the Call waiting (see page 52).
Answer a third call
Subscription dependent.
While in communication and one call being on hold,
you may receive a third call. You can either end one of
the calls before being able to answer the third one or
introduce the calling party into a conference (see
below). This service is limited to two current
communications (one active and one on hold).
Conference call
Subscription dependent.
You activate the conference call by
making several outgoing calls, or create
Conference
it from a multiparty call context. You
may have up to five members at the same time and
disconnected all calls at once with
Operator services
)
.
Make a first call with someone, then a second one (see
,
above). Press
and select Conference. Repeat the
process until five members are connected.
If there is an incoming call during the conference call
and there are less than five members, you can accept
this new call and add this member to the
call (if five members are already connected, you can
answer the call, but not add it to the conference).
The
Conf. members
options allow you to disconnect a
member of the conference by selecting
or select
to have a private call with this
Private call
member only (other members are put on hold).
Explicit call transfer
Subscription dependent.
You can connect an active call and a call on hold by
selecting the
option. You are disconnected
Transfer
when the transfer is completed.
This feature is different from the Call forward, which
takes place before you pick up the call (see page 51).
Conference
Remove
party,
59
Advertisement
Table of Contents
