Network - Philips 650 User Manual

Call barring
Allows you to limit the use of your
phone to specific calls by letting you bar
Call barring
both outgoing and incoming calls. This
function is network dependent and requires a specific
call barring password supplied by your service
provider. Call barring can be applied both to
calls (All calls
Incoming
calls (All calls,
Outgoing
Exc. Home).
In all cases, the Cancel option of these menus applies to
all calls at once. The Status menu allows you to know
whether a type of call is barred or not.
Change codes
Allows you to change your
codes, as well as the call
PIN 2
Change codes
code. Depending on your SIM card,
some features or options may require a PIN2 secret
code, given to you by your operator.
If you enter a wrong PIN2 code 3 times, your SIM
card is blocked. To unblock it, request the PUK2 code
20
or roaming) and to
When
calls and
International
PIN
Barring
from your operator or retailer. If you enter an
incorrect PUK code 10 times in a row, the SIM card
will be blocked and unusable. If this happens, contact
your operator or retailer.
PIN protection
PIN protection
Intl.
You cannot change your PIN code if this option is Off.

Network

Contact your phone operator to have full information
about GPRS availability over their network and for
and
an appropriate subscription. You might also need to
configure your phone with the GPRS settings supplied
by your operator, by using the menus described in this
section. Then select the bearer (GSM or GPRS) in the
menus of each application to be used (e.g. WAP,
MMS, e-mail, etc.).
This allows you to set the PIN
protection or Off. When On, you
On
will be asked to enter your PIN code
when switching your phone on.
Settings