Table of Contents
Advertisement
Next steps
1
Replace the Broadcom supercap battery.
2
Complete the procedure listed in After working inside your system.
Installing Broadcom supercap
Prerequisites
1
Follow the safety guidelines listed in the Safety instructions section.
2
Complete the procedure listed in Before working inside your system.
Steps
1
Locate the place holder in the assigned location. The screw holes on the chassis and holder align when the holder is placed correctly.
Figure 41. Locating the supercap
2
Insert the screws in the holder and tighten to secure the holder in place.
100
Installation and Service Manual
Installing and removing server components
Advertisement
Table of Contents
