Table of Contents
Advertisement
Next step
1
Complete the procedure listed in After working inside your system.
Removing x16 SATA M.2 card
Prerequisites
1
Ensure that you read the Safety instructions.
2
Complete the procedure listed in Before working inside your system.
Steps
1
Loosen the captive screw securing the SATA M.2 card.
2
Unlock the hook from the SATA M.2 card and remove the SATA M.2 card form the server board.
Figure 80. Removing the SATA M.2 card
3
Remove the screw securing the SATA M.2 card and M.2 SSD board.
4
Rotate the M.2 SSD board out and remove.
156
Installation and Service Manual
Installing and removing server components
Advertisement
Table of Contents
