Section I; Installation; Standard Installation Parts - Toyotomi FF V30 Operation Instructions Manual

Vented heating system

Hide thumbs Also See for FF V30:

Table of Contents

SECTION I:

GENERAL DESCRIPTION: The FF V30 is designed to be installed in an outside wall so the full advantage of instal-

lation simplicity can be made with the "Flue Pipe", which eliminates the need for tall chimney type flues. No hearth

or fire surround is required. While some Flue pipe wall extentions are available, they complicate installation. Read

and understand the limitations of Flue pipe wall extension options.

The following standard installation parts are enclosed with heater. For alternate installation methods, you may need

Wall Bracket (2 sets) (PART #17212589)

Tapping Screw (1) (PART #17208678)

Bind Tapping Screw (1) (PART #17187555)

Wood Screw (1) (PART #17206066)

Pipe Holder (1) (PART #17212685)

(3)

Wood Screw (3)

Flue Pipe (1) (PART #17224296)

(PART #17206066)

Exhaust Air Cap (1) (PART #17212661)

Pipe Stopper (1) (PART #17212678)

Intake Air Cap (1) (PART #17212656)

Bent Joint (L) (1)

Insulating Cover

(PART #17212698)

(PART #17212687)

L-shaped Hose (2) (PART #17185292)

Hose Band (2) (PART #17212677)

Inlet Hose (1) (PART #17212693)

(Hose Clamp)

Oil Catch (1) (PART #17187525)

Table of Contents