Toyotomi FF V30 Operation Instructions Manual page 10

2. Adjusting Room Temperature
A. Press the "▲MIN." or "▼HOUR" button. ˚F or ˚C will start to flash.
NOTE: The"▲MIN." or "▼HOUR" button will change the temperature in increment of 1˚C (2˚F).
B. Press the "▲MIN." or "▼HOUR" button as required. Room temperature can be set from 10˚C (50˚F) to 32°C
(90˚F). (Initial setting : 13˚C (56˚F))
NOTE: Desired temperature setting will be displayed on the digital indicator when you set the room
temperature.
C. When room temperature reaches the selected setting, heater will automatically shift
to "MED" or "LOW" burning mode to maintain the desired temperature.
When room temperature exceeds the selected setting by approx. 2˚C (4˚F), the
heater will automatically shut off. As room temperature drops, the heater will
automatically re-start to maintain the desired temperature.
POWER SAVER OPERATION
The Power Saver mode reduces the frequency of ignition actions, to save electric
consumption.
Press the POWER SAVER (DAY SELECT) button "ON" while in operation to start the
operation of the "POWER SAVER". "POWER SAVER" sign will be shown on the digital
indicator.
When the room temperature exceeds the selected setting by approximately 6˚C (10˚F), the
heater will automatically shut off. As the room temperature becomes lower than the
selected setting, the heater will automatically re-start to maintain the desired temperature.
9
Approx. +2˚C
Approx. +1˚C
SET
TEMP.
High Medium
Approx. +6˚C
Approx. +1˚C
SET
TEMP.
High Medium
Low Off
Low Off
Re-lgnition
Re-lgnition