Toshiba 26AV500U Owner's Manual page 13

Connectin a VCRandantenna or CableTV {noCablebox)
Stereo VCR
ANT/CABLE
You will need:
• coaxial cables
• standardA/V cables
- For better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) instead of
the standard video cable. Do not connect both types of
video cable to VIDEO 1 at the same time or the picture
performance will be unacceptable.
- If you have a mono VCR, connect L/MONO on the TV
to your VCR's audio out terminal using the white audio
cable onl3z
To view the antenna or Cable signal:
Select the ANT video input source on the TV2:_
To view the VCR:
Turn ON the VCR_ Select the VIDEO 1 video input source on
the TV2:
To select the video input source, press iNPUT on the remote
control (_> page 21). To program the TV remote centre] to operate
other devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials
is prohibited under the Copyright Laws of the United States
and other countries, and may subject you to civil and criminal
liability.
13