Motorola SECTEL 1500 User Manual page 55

Programming Memory Dial Keys Using REDIAL
Use the following procedure to program the last number dialed in to a
memory dial key location.
Make sure the handset is on-hook.
@Press|PRGMl. Be
@Press IredialI. The last number dialed appears on the message display.
Press amemory dial key to transfer the number from the display to the
memory dial key location.
Labeling the Memory Dial Keys
©
sure the PRGM annunciator comes on.
After programming the memory dial keys, use the paper label between the
two rows of memory dial keys to identify each key.
©Remove the plastic shield by squeezing in at each end of the shield
until the plastic shield bows up.
©Remove the paper label and write the desired number on the correct
a r e a o f t h e l a b e l .
(?) Replace the paper in the slot and install the plastic shield.
Using the Memory Dial Keys
Once you have programmed the memory dial keys, use the following pro¬
cedure for speed dialing.
©
Take the handset off-hook. (If the speakerphone option is enabled, the
Ispkr Ikey may be pressed).
Press the memory dial key. The number stored in the memory location
appears on the message display one digit at atime as the terminal dials.
If the number displayed is incorrect, or the user wants to stop the dial¬
ing sequence for any reason, press IresetI or place the handset on-
hook. (If the speakerphone option is used, press the ISPKR |key.
©
©
3 - 2 3