Advertisement
Notices
The information contained in this document is subject to change without notice.
This document contains proprietary information that is protected by copyright.All
rights are reserved. No part of this document may be photocopied, reproduced, or
translated to another language without the prior written consent of the Agilent
Technologies.
Agilent Technologies Japan, LTD.
Component Test PGU-Kobe
1-3-2, Murotani, Nishi-Ku, Kobe-shi, Hyogo, 651-2241 Japan
© Copyright 1990, 1998, 1999, 2000 Agilent Technologies Japan, LTD.
Manual Printing History
The manual's printing date and part number indicate its current edition. The
printing date changes when a new edition is printed. (Minor corrections and
updates that are incorporated at reprint do not cause the date to change.) The
manual part number changes when extensive technical changes are incorporated.
1990
November 1998 Second Edition
August 1999
May 2000
Safety Summary
The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument. Failure to comply with these
precautions or with specific WARNINGS elsewhere in this manual may impair the
protection provided by the equipment. In addition it violates safety standards of
design, manufacture, and intended use of the instrument.
The Agilent Technologies assumes no liability for the customer's failure to comply
with these requirements.
16048D comply with INSTALLATION CATEGORY I and POLLUTION
NOTE
DEGREE 2 in IEC61010-1. 16048D are INDOOR USE product.
2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
First Edition
Third Edition
(part number :
Fourth Edition
(part number :
16048-90031
)
16048-90031
)
Advertisement
